Outdoor Waterproof Wire Connectors
Outdoor waterproof wire connectors are great for saltwater boating and gigging light setups. They also work well in confined spaces like the ones on deer feeder battery terminals.
Waterproof splices in one easy step. Pre-filled with a dielectric silicone sealant, outdoor waterproof wire connectors these connectors protect from moisture and corrosion. They are also approved for direct burial use!
DryConn Black/Grey Connectors
King Innovation DryConn Black and Grey Waterproof Connectors are waterproof twist-on wire connectors pre-filled with non-hardening silicone. They are designed for direct burial landscape lighting connections. The wire cap is filled with silicone to seal and protect the raw copper connection from ground moisture – a quality one-step connection for a permanent, waterproof, long lasting installation. Choose from a variety of sizes. 100 per pack. (2 packs used for each landscape lighting fixture). UL 486D listed.
DryConn Blue/Blue Connectors
Ensure your wiring project will pass inspection with a UL listed waterproof connector. These King Innovation Blue Low Voltage Wire Connectors are made to eliminate loose wire connections and prevent electrical fires. These waterproof connectors are corrosion and water proof and can withstand up to 600V for building wire or 1000V for signs or luminaries. They are easy to install, and no pre-twisting is needed.
Waterproof your splices outdoors with this large, direct burial, aqua DryConn wire connector. This quality one-step connector is filled with a dielectric silicone sealant that surrounds your splice, making it waterproof and corrosion resistant. It meets the conditions set by the most current NEC code book, requiring a UL listed connector to be used for all splices in wet and damp locations.
IDEAL WeatherProof Connectors
IDEAL WeatherProof Connectors are a great way to waterproof your work that is exposed to the moisture waterproof connector manufacturer and elements. These connectors have a dielectric silicone sealant that surrounds your splices, keeping them water and corrosion resistant. These are ideal for landscape lighting, irrigation and outdoor speakers wires.
These crimp style waterproof connectors come pre-filled with a dielectric silicone sealant that protects and encapsulates the splice. The holes in the housing are designed to prevent silicone from escaping, and the connectors themselves are molded and shaped to keep the moisture out. These are ideal for direct bury connections and are rated for 120V and 12V applications.
These are a crimp connector type that uses solder and heat to make the connection, not a screw-in type like our other options. This means you have to use a heat source like a torch, lighter or heat gun to tin the connectors and melt the solder, but it makes the connection much quicker and easier than the old method of crimping and tape. These are a great option for saltwater environments where a corrosive environment is common. These also work well for making wiring extensions on your Swamp Eye submersible lights when used with a drop bar setup. They also fit the accessory bolt on marine deep cycle battery terminals, making it quick and easy to attach your lights to your battery.
OSD KI-12 Connectors
These waterproof connectors are a must-have for any installer who works with outdoor wiring. They are filled with a silicone sealant that keeps water and moisture out of your wiring, protecting your work from the elements. These connectors are perfect for use in a variety of landscape lighting and low voltage irrigation projects.
KI-12 Connectors are a crimp style wire connector that is pre-filled with a dielectric silicone sealant. This ensures a secure, waterproof connection and eliminates the need for additional materials such as heat shrink, tape, or corrosion kits. These are a great choice for use in confined spaces where it is not practical to crimp or solder, or when a quick, easy and reliable solution is required.
This is the ideal product for making underwater drop bars on your Swamp Eye submersible lights, so you can easily run wiring extensions from the battery to the light. It is also a good choice for wiring your saltwater boat or making wire extension connections on your scuba diving lights.
This product is a crimp style, gel-filled waterproof connector that can be used on up to 14AWG wire. This quality one-step connector is filled with a dielectric silicone sealant that completely surrounds splices, keeping them water and corrosion resistant. It is a good choice for electrical connections exposed to steam, water vapors and dust.
